Archive for the ‘SDCC’ Category.

small SDCC projects and sources

This page contains some simple projects and programs for use with the SDCC compiler and a 8051 compatible mcu.

register definition for Atmel T89C51CC02
This register definition include file is for use with the SDCC compiler. It is based upon the faulty one supplied by Atmel.
Download (7k)

A/D convertor access for Atmel T89C51CC02
This sample C file for the SDCC compiler supplies a simple routine to measure voltages with the builtin analog-digital convertor of the Atmel T89C51CC02.
The routine works with simple polling.
Download (0.7k)

register definition for Oki MSM80C154S and MSM83C154S
This is a register definition include file for use with the SDCC compiler. It mainly defines the IOCON register and its different bits.
(NOTE: This register definition comes included with SDCC since version 2.6)
Download (1.8k)

SIO Test
A simple test program to initialize and use the SIO of a 8051 mcu from the SDCC compiler using autobaud detection and polling variants of putchar() and getchar().
Download (3.6k)

Delay
A simple routine which uses inline assembly to give a delay routine. It waits for 100ms on a MCU clocked at 12MHz with default of 12 cycles per instruction.
Download (0.5k)

MicroSIO
A small lib for use with SDCC and a 8051 target for using the SIO in polled mode without disabling a running SIO IRQ. It is intended for use with the Tasking Monitor and a preconfigured SIO. The routines  have been tested with my development board. A Makefile for multiple file SDCC project include.
Download (1.5k)